Conyer Roofing & Exteriors

Standing seam: no exposed fasteners, no compromise.

Concealed clips, mechanically seamed panels, and details done properly at every penetration.
  • Photo documentation of everything we find
  • Honest recommendation — repair, replace, or leave it alone
  • Written itemized estimate, no pressure
  • GAF certified contractorMaster Elite® President’s ClubTop tier of GAF roofing contractors
  • Golden Pledge® Warranty AvailableUp to 25 years of workmanship coverage
  • Middle TennesseeLocal crew · Portland, TN
  • Free, documented inspectionWritten, itemized estimate

Standing seam gets its name from the raised vertical seams where panels join. The fasteners live underneath those seams, clipped to the deck and hidden from weather entirely — which removes the single most common failure point on a metal roof: the rubber washer on an exposed screw, drying out and shrinking after fifteen summers.

Why it costs more. Panels are typically roll-formed to the exact length of your roof, clips allow thermal movement, and seams are either snapped or mechanically seamed on site. It is slower, more precise work, and it shows in both the price and the lifespan.

Where it shines. Long, clean roof planes; modern and farmhouse architecture; low-slope sections where shingles simply are not rated; and any homeowner whose honest plan is to never re-roof again.

We detail the parts nobody photographs — valleys, sidewall and headwall flashing, pipe penetrations, and ridge ventilation — because that is where metal roofs actually leak when they leak at all.

A simple, transparent process

From inspection to peace of mind.

  1. 01

    Inspect & document

    We assess the whole exterior, document what we find with photos, and explain it plainly.

  2. 02

    Build your options

    We walk you through the best options for your home and a clear, itemized proposal.

  3. 03

    Installation

    Our crews install to manufacturer specification and leave the site clean every day.

  4. 04

    Walkthrough & warranty

    A final walkthrough to make sure everything is right, then we register your warranty.

Local insights

What does a roof replacement cost in Middle Tennessee?

Real numbers for Sumner, Robertson, Davidson, and Wilson County homes — what drives the price, where cheap bids cut corners, and how financing changes the math.

Read the cost guide

What’s inside

  • The honest ranges (2026)
  • What actually moves the number
  • Why the $9,000 bid costs more than the $18,000 one
  • Insurance and financing change the math
  • Getting your real number

Questions

Standing Seam Metal Roofing Questions, Answered

View All FAQs
Metal roof vs. architectural shingles — which is better?

Both are excellent when installed right; they solve different problems.

Architectural shingles (like GAF Timberline HDZ) cost roughly half as much installed, look right on most Middle Tennessee homes, install in a day, and carry outstanding warranties. For most homeowners, they're the sweet spot.

Standing-seam metal costs significantly more up front but lasts 40–60 years, sheds storms beautifully, and can lower cooling bills. It makes the most sense if this is your forever home, or on farmhouse/modern styles where the look is the point.

We install both, so you'll get a straight comparison for your specific house instead of a pitch for whatever we happen to sell.

What warranty comes with a new GAF roof?

Two layers of protection:

  • Materials: GAF shingles carry a Lifetime limited warranty on the shingles themselves when installed as part of a qualifying system.
  • Workmanship: Because we're a GAF Master Elite contractor, we can register enhanced system warranties up to the Golden Pledge® Warranty — which includes up to 25 years of workmanship coverage inspected and backed by GAF directly.

That second layer is the one most homeowners never get. A typical contractor's "workmanship warranty" is only as good as the company behind it; a Golden Pledge is honored by GAF even if the installing contractor is gone. We register every eligible warranty and hand you the paperwork before we're done.

Free inspection

Start with a free inspection.

Every standing seam metal roofing project begins the same way: we look, we photograph, we give you a straight answer — and you decide from there.

  • Photo documentation of everything we find
  • Honest recommendation — repair, replace, or leave it alone
  • Written itemized estimate, no pressure

Prefer to talk it through?(615) 802-1032

Schedule your free inspection

Most are booked within 24–48 hours.

Free, no-obligation inspection · We never sell your information

Prefer to talk? Call (615) 802-1032

Ready to talk about your standing seam metal roofing project?

Start with a free inspection from Middle Tennessee’s Master Elite contractor — honest answers, photo documentation, zero pressure.

Call Now Text UsFree Quote